9/27/12

New Website

We are working on a new website. It is still under construction but you will be able to purchase off of this site in the future.

www.dixiegunworx.com

9/11/12

Winchester Model 70 .243 Rifle Custom Loads Accurized




Completely rebuilt.
New Thumbhole Laminate Stock w/ New Hogue Recoil pad.
Rifle action was pillar and glass bedded into the stock.
Timney 3 lb. trigger that can be adjusted.
Barrel was free floated
Bolt lugs lapped
Raceways, follower, chamber, feedramp all polished
11 degree target crown
Recessed Quick Disconnect sling mounts in stock
Nikon Buckmaster w/ BDC retical 4.5x14x40 Scope

This is my wife's personal rifle. She is having a very hard time selling it but wants to sell to build a different caliber. She shot at deer at 375 yards. You could put a baseball through the entrance wound and a softball through the exit. Busted both shoulder blades.
We have all of the load information with Velocity over 3,000 fps. Also have a chart we made for the scope that shows how high/low the bullet is hitting out to 450 yards.

We had a load for coyote's using 65 Grain bullets that was extremely accurate.

www.dixiegunworx.com (still working on...)

9/3/12

Remington 700 BDL .308




Custom built Rifle accurized by Dixie Gunworx.
- Stock is custom glass bedded with aluminum pillars.
- Barrel is free floated.
- Barrel is re-crowned to an 11 degree target crown.
- Chamber, raceway, feed ramp, and follower are polished.
- Bolt lugs are lapped and polished.
- Timney trigger installed.
- Custom talley quick disconnect scope mounts epoxy mounted and lapped to the receiver.
- 1/2" MOA

Scope:
Nikon Monarch 4-16x40mm

Custom load built by High Country Ammo. Load information is included with gun.

8/16/12

Custom Built M4 / AR15


Guns are custom built according to customers specifications. My prices will beat anything you can find in the store with comparable parts. These guns are better than the standard Colt 6920 that the military uses. I can't keep these in stock so please be patient if you are put on a waiting list.
  • ·         Due to the high demand and parts availability, some components might be substituted for an equal or better component. If you want a specific brand contact us. If you want to add or remove accessories we can do that too.
 



 "JJ"  Pictured includes:
**Upper Receiver from Vltor MUR.
*Lower receiver from CMMG w/ CMMG Parts kit
*5.56 4150 Machine Gun Grade LMT Barrel (30,000 rounds before it needs to be replaced)
*LMT Full auto bolt carrier group
*BCM/Vltor mod 4 charging handle.
*Midwest Industries 10” free floating forearm w/ Yankee Hill Machine Gas block and black plated gas tube.
*Pistol grip is CAA Command Arms UPG 16 adjustable front and back straps for perfect grip.
* Rear stock is Magpul ACS
* Backup Sights are Magpul MBUS
*Vltor bipods
*Yankee hill phantom muzzle break.
*Long range Leupold VX-III 4.5-14X40 CDS turret system mounted on a Warne R.A.M.P. mount.
*Leupold Delta Point Reflex sight mounted on the rear of the Warne R.A.M.P. at a 45 degree angle.

View of optics from shooters position. Long distance Rifle Scope, Mini Red Dot Reflex Sight to the Right, and back up sights folded underneath.


Variation of the "J.J."

----------------------------------------------------------------

    "DGX"
*Upper Receiver from LMT.
*Lower receiver from CMMG w/ CMMG Parts kit
*5.56 4150 Machine Gun Grade LMT Barrel (30,000 rounds before it needs to be replaced)
*LMT Full auto bolt carrier group
*BCM/Vltor mod 4 charging handle.
*Midwest Industries 10” free floating forearm w/ Yankee Hill Machine Gas block and black plated gas tube.
*Pistol grip is CAA (Command Arms) UPG 16 adjustable front and back straps for perfect grip.
* Rear stock is Magpul ACS.
* Backup Sights are Magpul MBUS sights

---------------------------------------------------------------------------------------------------------------------------
MOE includes:

*Upper receiver from LMT.
*Lower receiver from CMMG.
*CMMG Parts kit
*5.56 4150 Machine Gun Grade LMT Barrel (30,000 rounds before it needs to be replaced)
*LMT Full auto bolt carrier group
*BCM/Vltor mod 4 charging handle.
* Magpul MOE forearm and butt stock.
*Pistol grip Command Arms or CAA. UPG adjustable front and back straps.
*Rear Magpul BUS site.
--------------------------------------------------------------------------------------------------------------------------
 

Base model prices start at $ 807 and comes with everything you will need except rear sight and forearm.

Base model includes:
*Upper + Lower receivers from LMT or CMMG.
*CMMG Parts kit
*5.56 4150 Machine Gun Grade LMT Barrel (30,000 rounds before it needs to be replaced)
*LMT Full auto bolt carrier group
*BCM/Vltor mod 4 charging handle.
Anything can be upgraded from the base model.

Other Pics:


7/24/12

New Cerakote color we mixed up



FOR SALE:
Remington 700 ADL Rifle Stock Short Action : $99
Reaper Pattern




SOLD
Ruger 10/22 .22 Rifle LIGHTWEIGHT

This is a pretty neat little rifle only weighing 4 1/2 lbs.
Price doesn't include scope or scope accessories
Volquartzen Barrel - threaded tip (1/2"x28tpi)
Trigger Job
Metal Trigger
Competition Sear in rifle
Hydro dipped Receiver
Bedded the barrel (free float action)
Red Dot Burris Fast Fire
Burris Fast fire Picatinny protector mount
Scope Rail




Remington 870 Tactical Shotgun Rebuild Kit $140

• 7 Shot magazine Extension
• Heat shield
• Streamlight tactical rail adapter
• Barrel magazine clamp
• Tactical forearm
• 2 Rear stocks
• ( Pistol Grip)
• (6 position collapsible butt stock)

I can ship anywhere in U.S. Shipping to UT = $8
.


1/1/12

Cerakote Projects







A pair of old Ruger 10/22 Cerakoted and replaced stocks with Hogue Stocks.